Linux version 2.4.22-ac1 (root@quinipt) (gcc versión 3.3.2 20030908 (Debian prerelease)) #8 vie sep 12 17:15:35 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data) BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 495MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 126960 zone(0): 4096 pages. zone(1): 122864 pages. zone(2): 0 pages. ACPI: RSDP (v000 OID_00 ) @ 0x000e6010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1effa5c0 ACPI: FADT (v001 COMPAL DCL51_00 0x00000100 _CSI 0x00010101) @ 0x1efffb00 ACPI: BOOT (v001 INSYDE BOOT_000 0x00000001 _CSI 0x00010101) @ 0x1efffb90 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x1efffbc0 ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x1effa600 ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000 Kernel command line: BOOT_IMAGE=Knoppix ro root=305 hdc=scsi ide_setup: hdc=scsi Initializing CPU#0 Detected 1298.917 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2595.22 BogoMIPS Memory: 499376k/507840k available (1654k kernel code, 8076k reserved, 605k data, 92k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: a7e9f9bf 00000000 00000000 00000000 CPU: Common caps: a7e9f9bf 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030813 PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1 PCI: Using configuration type 1 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................................................................................................ Table [DSDT](id F005) - 618 Objects with 53 Devices 188 Methods 20 Regions Parsing all Control Methods:.... Table [SSDT](id F003) - 7 Objects with 0 Devices 4 Methods 0 Regions ACPI Namespace successfully loaded at root c036081c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000001028 on int 9 Completing Region/Field/Buffer/Package initialization:...................................................................... Initialized 20/20 Regions 0/0 Fields 34/34 Buffers 16/16 Packages (633 nodes) Executing all Device _STA and_INI methods:...................................................... 54 Devices found containing: 54 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKA] (IRQs 10, enabled at IRQ 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 10, enabled at IRQ 5) ACPI: PCI Interrupt Link [LNKC] (IRQs 10, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 10, disabled) [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKE] (IRQs 10, enabled at IRQ 11) [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKF] (IRQs 10, enabled at IRQ 11) [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKG] (IRQs 10, enabled at IRQ 11) [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKH] (IRQs *10) ACPI: Embedded Controller [EC0] (gpe 28) PCI: Probing PCI hardware [ACPI Debug] Buffer: Length 06 [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ACPI Debug] Buffer: Length 06 [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ACPI Debug] Buffer: Length 06 [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ACPI Debug] Buffer: Length 06 [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 [ACPI Debug] Buffer: Length 06 [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket speedstep-centrino: found "Intel(R) Pentium(R) M processor 1300MHz": max frequency: 1300000kHz Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1 C2 C3, 5 performance states, 8 throttling states) intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets intelfb: Version 0.7.7, written by David Dawes intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 16252kB intelfb: Acceleration is not supported for the Intel(R) 855GM chipset. intelfb: HW cursor is not supported for mobile platforms. intelfb: Non-CRT device is enabled (LVDS port). Disabling mode switching. intelfb: Initial video mode is 1024x768-16@60. Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 424M agpgart: Detected an Intel(R) 855GM Chipset. agpgart: Detected 16252K stolen memory. agpgart: AGP aperture is 128M @ 0xb0000000 [drm] AGP 0.99 Aperture @ 0xb0000000 128MB [drm] Initialized i810 1.2.1 20020211 on minor 0 [drm] AGP 0.99 Aperture @ 0xb0000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 1 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK3021GAS, ATA DISK drive blk: queue c0376de0, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 58605120 sectors (30006 MB), CHS=3648/255/63, UDMA(33) ide-cd: passing drive hdc to ide-scsi emulation. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 > ide-cd: passing drive hdc to ide-scsi emulation. usb.c: registered new driver usbdevfs usb.c: registered new driver hub NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,5)) ... for (ide0(3,5)) ide0(3,5):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 92k freed Adding Swap: 530104k swap-space (priority -1) usb-uhci.c: $Revision: 1.275 $ time 17:19:05 Sep 12 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1200, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1600, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1700, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver mice: PS/2 mouse device common for all mice usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xe0a1b000, 00:02:3f:b9:e3:ff, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' Intel 810 + AC97 Audio, version 0.24, 17:18:37 Sep 12 2003 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe200 and 0xe100, MEM 0xf0080400 and 0xf0080600, IRQ 5 i810: Intel ICH4 mmio at 0xe0a2b400 and 0xe0a2d600 hub.c: new USB device 00:1d.2-2, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb3:2.0 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ALG64 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 SCSI subsystem driver Revision: 1.00 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R6112 Rev: 1031 Type: CD-ROM ANSI SCSI revision: 02 ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta IRQ list 0000, PCI irq11 Socket status: 30000006 ttyS1: LSR safety check engaged! memory : dc8ff100 memory : dc8ff180 memory : dc8ff200 memory : dc8ff280 mtrr: base(0xb0000000) is not aligned on a size(0x300000) boundary memory : dc8ff380 memory : dc8ff400 memory : dc8ff480 memory : dc8ff500 memory : dc8ff580 hub.c: new USB device 00:1d.1-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x830/0x3) is not claimed by any active driver. usb.c: USB disconnect on device 00:1d.1-1 address 2