Linux version 2.6.11-ck9-1e (root@quinipt) (gcc versió 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Fri Jun 3 21:49:36 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fffffc0 (ACPI data) BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1023MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 258032 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 OID_00 ) @ 0x000e6010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x3fffb9f6 ACPI: FADT (v001 TOSINV FACP_000 0x00000100 _CSI 0x00010101) @ 0x3ffffb00 ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x3ffffb90 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x3ffffbc0 ACPI: SSDT (v001 INSYDE GV3Ref 0x00001001 INTL 0x02012044) @ 0x3fffba2a ACPI: DSDT (v001 INSYDE Intel 0x00001004 INTL 0x02002036) @ 0x00000000 Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000) Built 1 zonelists Kernel command line: root=/dev/hda5 ro quiet splash noinotify resume=/dev/hda7 irqpoll Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01803000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1594.889 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1034900k/1048512k available (2060k kernel code, 13096k reserved, 836k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3153.92 BogoMIPS (lpj=1576960) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0c80) NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xe94d4, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 6) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 *7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 10 11) *0, disabled. ACPI: Embedded Controller [EC0] (gpe 16) ACPI: Power Resource [PUT2] (on) ACPI: Power Resource [PFA1] (off) ACPI: Power Resource [PFA0] (off) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. Simple Boot Flag at 0x37 set to 0x80 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=446.00 Mhz, System=216.00 MHz radeonfb: PLL min 20000 max 35000 Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: SEC radeonfb: detected LVDS panel size from BIOS: 1280x768 radeondb: BIOS provided dividers will be used Console: switching to colour frame buffer device 160x48 radeonfb: Dynamic Clock Power Management enabled radeonfb (0000:01:00.0): ATI Radeon NP ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FAN0] (off) ACPI: Fan [FAN1] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THZN] (44 C) ACPI: Thermal Zone [THZV] (37 C) Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xb0000000 [drm] Initialized drm 1.0.0 20040925 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 6 (level, low) -> IRQ 6 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS548060M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITADVD-RAM UJ-831S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: LID PCI2 MC97 KBC ACPI: (supports S0 S3 S4 S5) ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 172k freed NET: Registered protocol family 1 Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1 hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Synaptics Touchpad, model: 1 Firmware: 5.9 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio1 ieee1394: Initialized config rom entry `ip1394' SCSI subsystem initialized sbp2: $Rev: 1219 $ Ben Collins cdrom: open failed. ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 10, io base 0x1200 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 0x1220 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 0x1240 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xf4000000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected hw_random: cannot enable RNG, aborting usb 1-2: new low speed USB device using uhci_hcd and address 3 usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49521 usecs intel8x0: clocking to 48000 ieee80211_crypt: registered algorithm 'NULL' ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.4 ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 6 (level, low) -> IRQ 6 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 7 (level, low) -> IRQ 7 eth1: RealTek RTL8139 at 0xf1bb8300, 00:03:9d:75:32:46, IRQ 7 eth1: Identified 8139 chip type 'RTL-8100B/8139D' Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:02:09.0 [17ff:5005] Yenta: ISA IRQ mask 0x0038, PCI irq 10 Socket status: 30000006 ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:09.2[C] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[febff800-febfffff] Max Packet=[2048] eth1: link down ieee80211: eth0: Unknown management packet: 0 irq 11: nobody cared! [] __report_bad_irq+0x2a/0xa0 [] handle_IRQ_event+0x30/0x70 [] note_interrupt+0x70/0xb0 [] __do_IRQ+0x130/0x140 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 [] handle_IRQ_event+0x20/0x70 [] __do_IRQ+0xd0/0x140 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 [] delayed_reset_bus+0x77/0xe0 [ieee1394] [] worker_thread+0x1d9/0x2a0 [] delayed_reset_bus+0x0/0xe0 [ieee1394] [] default_wake_function+0x0/0x20 [] schedule+0x2d0/0x560 [] kthread+0x70/0xb0 [] default_wake_function+0x0/0x20 [] worker_thread+0x0/0x2a0 [] kthread+0xaa/0xb0 [] kthread+0x0/0xb0 [] kernel_thread_helper+0x5/0x18 handlers: [] (usb_hcd_irq+0x0/0x70 [usbcore]) [] (usb_hcd_irq+0x0/0x70 [usbcore]) Disabling IRQ #11 NET: Registered protocol family 17 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00039d039d753246] Capability LSM initialized NET: Registered protocol family 10 Disabled Privacy Extensions on device b03a0da0(lo) IPv6 over IPv4 tunneling driver eth1: link down [drm:drm_unlock] *ERROR* Process 5563 using kernel context 0 eth0: no IPv6 routers present eth1: no IPv6 routers present NET: Registered protocol family 4 NET: Registered protocol family 3 NET: Registered protocol family 5 nfs warning: mount version older than kernel